Published December 1, 2011 | 
X ray technician jobs are common in many health care centers. The technicians assist doctors to carry out diagnosis of medical conditions by the use of the imaging films. However, there is a difference between an x-ray technician and an x-ray technologist. The technicians are responsible for conducting CT scans and x-rays while the technologist helps in the production of the imaging films by working hand in hand with a patient and a doctor.
Though both the technicians and technologists have their specified job, the x-ray technician jobs involve both the specialties. The technicians have sole responsibility of preparing a patient to go for the radiology. They will also ensure that the patient is capable of going through the whole process of x-ray. After the diagnosis, the technicians are responsible for documenting and submitting the data collected to the physician for further action.
It is important to note that it is not the duty of an x ray technician to interpret the diagnosis results to the patients that have been diagnosed using x-rays. Some of the conditions that the technicians diagnose includes: hernia, tuberculosis and duodenal ulcers. The technicians are trained to handle both the stationary and portable x-ray machines.
X-ray technologists deal with bones, tissues and organs. They are able to capture the images of these body parts and then take the results to the doctors or radiologists for interpretation or development.
It is mandatory for one to complete at least an associate degree in radiology to be registered as an x ray technician. There are also other critical procedures that the technicians are taught in order to ensure safety when conducting the diagnosis to the patients. It is also mandatory to pass certification examinations before being issued with practicing license.
The salary of an x ray technologist varies depending on the experience, knowledge, geographical location and the organization. Health care jobs are very lucrative and a good number of people are joining the career to become radiologists.
X ray technologists can work full time or part time in the laboratories. Other settings of work includes: clinics, outpatient care centers, hospitals and diagnostic imaging centers. Full time job normally take 40 hours a week and part- time take a period of 20 hours within a week.
Though the profession is very lucrative, it is important for one aspiring to become an x-ray technologist to remain focused, honest, resilient, keen, hard working and persistent.
Published November 30, 2011 | Prior to engaging in a study program, it is vital for one to have a clear understanding of his or her career choices. For instance, when one is faced with the decision of selecting majors, he or she must choose those that are relevant to the career that is to be pursued in future. A person who expects to become an aviation mechanic in the future must be well informed about planes and the specific licenses that they require. The information below on aircraft mechanics is very essential for anyone looking at getting a job as an aviation mechanic.
The certifications
Aviation mechanics that have got the FAA certification can make a choice between an airframe rating or a power plant rating. The airframe rating is mainly determined by all the different parts of the planes body and also the structure. The power plants rating are normally a portion of the specification of the air crafts engine. One must be able to totally complete eighteen months of plane maintenance to even qualify to apply for the tests in a bid to get any of the mentioned certifications. The time that the aviation technician has worked must be confirmed by the supervisor or in some cases the employer can issue out a notarized statement. Any works that are related to maintenance can only be performed by those who have attained certifications from aircraft maintenance institutions.
In case one would want the two types of certifications, he or she is allowed to take on a totally different test after completing thirty months. Most aviation mechanics strive to attain the two certifications though many are holders of the A & P certificates.
The repair of avionics is a field that is highly specialized, which makes all the hard work worth it. Avionics has its main concentration on the instruments and electronic systems of the plane. The irony is that most of the aircraft mechanics have not received training in this field. One has to acquire additional licenses for this.
It is worth mentioning that the aviation industry is now leaning more towards avionics. These forecasts will become evident over time with the increased demand for the services in the job market. Prospective employers are attracted by an aviation mechanic who have trained in both avionics and aviation. With this combination, one can be sure of getting a well paying job in the aviation industry.
Published November 27, 2011 | You may be wondering what types of jobs are available for an ultrasound technician. Most ultrasound technicians work in a doctor’s office or hospital. When you are just getting started you will be considered a general tech and may work in every situation where an ultrasound is needed. As you get more experience, you can choose the area you enjoy the most and become a specialist. Following are some of the available jobs for an ultrasound technician.
OB/GYN Ultrasound Technician
One rewarding career option is to become an OB/GYN ultrasound technician specialist. With this job you will be taking ultrasounds that deal with the female reproductive system. One of the most exciting parts of this job is working with expectant parents. You will be the one who gives them their very first chance to see their baby.
Breast Ultrasound Technician
Once you have some experience as a general ultrasound tech, you may want to get further training to become a breast ultrasound technician. The reason you will need additional training is that the machine used for mammograms are a little different than other sonography equipment. This is an important career as you will be helping women detect the early signs of breast cancer so they can seek treatment.
Cardiac Ultrasound Technician
A cardiac ultrasound technician, or echocardiographer, specializes in sonograms of the heart. With an ultrasound you will be able to see the valves and chambers of the heart in a non-invasive way. Cardiac ultrasound technicians often with older patients who may be experiencing symptoms of heart disease. An echocardiograph can also be performed to detect heart problems in children or young adults.
Abdominal Ultrasound Technician
An abdominal ultrasound technician captures images of several different parts of the body. Organs that are require an ultrasound include the liver, spleen, kidneys, and gallbladder. Some people are sent for an ultrasound after their liver panel blood results come back with abnormal levels. An ultrasound can also be performed to detect and determine treatment for kidney stones or kidney failure.
There are several different areas in which you can specialize when you get a job as an ultrasound technician. Each requires a certain level of training and experience. You will probably begin your career as a general ultrasound technician working in several different areas. Figure out which specialty you most enjoy. Get the ultrasound technician training you need to start your career today!
Published November 26, 2011 | A medical transcription professional has many opportunities for a job as a work at home professional. The nature of the position allows it to be done outside the auspices of an office it allows for much more freedom than other positions, especially in the medical industry.
Below are descriptions for many types of jobs for a medical transcription professional.
At home transcriptionist
Most at home transcription positions will require between 3 to 5 years of medical transcription experience. Jobs like this will also require that a medical transcriptionist have his or her own software to perform the duties of the job, such as Docshuttle or Wavplayer. ESL experience is also good. The job will also require extensive editing and spellchecking duties.
Most positions will be for a particular clinic, which specializes, in certain medical disciplines. It is good if you can also show experience in the discipline of the employing doctor or clinic.
Medical language specialists
The medical language specialist will definitely need ESL physician dictation experience with at least 2 years of experience in the industry. The number of dictators that are on each account is also important, as the more dictators on a particular account, the larger the account is. Many jobs will only accept resumes from people who have worked on accounts that have above a certain number of dictators.
Data migrating technicians
Data migrating technicians work in moving the data of a medical clinic or medical office from one medium to another. Today it is usually from a paper data program into an electronic medical records platform, as many doctors and clinics are shifting to a paperless office. Skills needed are an experience with medical terminology and working within an electronic medical records platform. Many times a job like this will be an independent contractor position with the ability to work from home. There are quotas that must be met, and a final deadline, but the day to day workload is left up to the independent contractors themselves.
QA editor
Quality assurance is a key position in medical transcription, but especially in migration projects and during tax periods or in an audit. People who take on a QA editor job will most likely have to have experience not only in medical transcription, but also in quality control or corporate processing. As such, the experience will most likely be between 5 to 7 years for this job.
Published November 25, 2011 | Those who are looking in to getting into more fulfilling careers can consider taking a veterinary technician career. This job does not only provide a sufficient salary but also provide a lot of fulfillment. However, in order to become a recognized veterinary technician, one must study the right course and get the required accreditation and certificates.
There are certain methods that one can use in order to become a fully certified veterinary technician. One must have a license that allows him or her to operate in all the fifty states of the United States of America. Below are three methods that one can use to receive the required certification:
•By applying and receiving a job as a veterinary technician before receiving the required certification can provide one with the opportunity to receive hands on training. This is a common approach that is used by many employers who want to personally train their staff in a bid to provide high quality service.
• Its possible to attend a community college and get the proper certificates that are required by the State. The role of such institutions is to ensure that they impact knowledge to those interested in various fields. As a prospective student, take time and discuss the requirements and details of the program so as to gain a deeper insight on the same.
• Technology has made it easy for people to advance their education online. The same case applies to the veterinary technician certification, which can be easily acquired online. It is worth mentioning that the option of taking the course on the web usually has a caveat. This means that you do not know exactly the quality of education that you are buying on the web. It is therefore necessary to carry out a background check of the online course that is being provided. The basic point is to ensure that it is fully accredited by the Association of American Veterinary Medical, which is the governing body in relation to veterinary technician certifications.
In order to become a veterinary technician, the three approaches that have been mentioned above can be of great assistance. It is also advisable to research well on the other options that are available in the area where you reside. By contacting the office of a local veterinary in your location, it becomes easier to get the information required. It is important to maintain integrity.
Published November 24, 2011 | Many individuals choose medical billing and coding as a profession simply due to relatively low education costs. Most billers and coders will take a short-term course designed to help them obtain the certification they will need to get a job. These certification courses usually range from $1,500 – $2,500.
Some professional prefer a two-year degree in addition to their certification. The costs of an additional degree can vary depending upon the school of choice, but ranges between $15,000 and $25,000 total.
To help cover the initial cost of education, many Federal grant and loan programs are available to those receiving training in the medical field. If there are no available sources of funding from Federal Financial Aid, many banks and credit unions offer personal school loans direct to students.
Potential Salaries
The salary range for medical billers and coders, as with any other profession, can vary depending on a few different factors. Work experience makes a big impact on the level of pay. Beginning coders can expect to average about eleven dollars per hour whereas coders with ten to fifteen years of experience may make up to twenty-three dollars per hour.
The industry the job is in can also affect salary levels. As a medical biller and coder, there are options to work for insurance companies, small doctors’ offices working with patients, or in a large hospital working with administration.
Typically, those working directly with insurance companies will average eleven to sixteen dollars per hour while those who deal with customer billings will only average nine to thirteen dollars per hour. Working with the administration as a medical billing and coder is generally the highest paid position, averaging between eleven and sixteen dollars per hour.
Available Jobs
For many medical billers and coders, the opportunity to eventually work from a home office setting is an alluring part of the profession. By delegating the work load and setting the rates, many medical billers and coders are able to make as little or as much as they want, depending on the work load they are able to handle. This is a good option for those needing flexibility in their daily lives.
However, many more professionals work for a business of some sort, whether with the insurance or healthcare industries. The office equipment, as well as the clients, are already available, and most of these positions come with full-time benefits as well as a dependable salary.